Why Is Magnetics Important in High Frequency Transformers?

 


Magnetics in High Frequency Transformers

 

Advances in electronic system technology have led to an increasing demand for higher power density. As power density requirements increase, the physical size requirements of these systems continue to tend to decrease.

 

One solution to meet and optimize these two design parameters is to integrate electromagnetic power components operating at high frequencies. This approach has several advantages, including reducing the size of the required magnetic components. However, due to skin and neighborhood effects, power loss can also be caused. In addition, if precautions are taken, AC loss will affect the overall performance of the component.

 

One way to avoid AC loss is to use special conductive materials in high frequency applications, such as stranded wires and copper foil. The design and construction of these materials greatly reduces the risk of loss of skin and proximal effects.

 


Application of High Frequency Transformers

 

With the rise of digital electronic technology, the demand for high-frequency transformers will continue to grow. These devices are very suitable for these needs in a variety of compact electronic applications, such as:

 

Industrial equipment

Solar converters

Electric drives

Energy conversion

 

JRPanel high frequency transformers are specially designed and manufactured to achieve the best performance by reducing current loss and reducing the delay caused by hysteresis. Our manufacturing experts use special tools and materials suitable for high-frequency magnets and transformers, such as:

 

Litz Wire

Planar Magnetics

FEA simulation



If you’d like to learn more about how we can assist you with your high frequency power needs, request a free quote today.


评论

发表评论

此博客中的热门博文

How to Read Circuit Diagrams for Beginners

图片
     👉 https://www.jrpanel.com/R This articles shows how to read circuit diagrams for beginners in electronics. Learn to read electrical and electronic circuit diagrams or schematics. A drawing of an electrical or electronic circuit is known as a circuit diagram, but can also be called a schematic diagram, or just schematic. Circuit or schematic diagrams consist of symbols representing physical components and lines representing wires or electrical conductors. In order to learn how to read a circuit diagram, it is necessary to learn what the schematic symbol of a component looks like. It is also necessary to understand how the components are connected together in the circuit. Battery and Light Bulb Circuit Probably the simplest circuit that can be drawn is one that you may have seen in a school science class: a battery connected to a light bulb as shown below. Simple Circuit Diagram for Beginners Circuit Symbols and Physical Components Each electronic or electrical component is represe
阅读全文

What Are the Factors That Affect the Cost of a Membrane Switch?

图片
  "How much does it cost to make a membrane switch? ”  It ’ s a common question we get from customers (and likely one you ’ re pondering if you ’ re reading this article). Unfortunately, the short answer is … it depends.   Since membrane switches are custom-made and include so many variables, it ’ s not feasible to provide a clear-cut estimate without first reviewing the specifications and discussing a few areas. However, based on our experience, three main factors impact the cost of manufacturing a membrane switch.   1.  Circuit design   The printed circuit is the most expensive layer of a membrane switch. Material choices and design (such as the number of traces) can significantly impact the unit ’ s cost. High-quality membrane switches typically use conductive silver ink, which provides the highest conductivity. Depending on application and budget requirements, lower-conductive inks such as carbon, copper, and alloys can be used.   2.   Number of layers and optional features  
阅读全文

The Importance of Predictability for High-end PCB Manufacturing

图片
  If there is a way to ensure that the product is reliable, it is to ensure the predictability of its PCB, which is an important part of the product. In fact, PCB is the core component in almost all electronic products (from phones to computer systems) today. From automobiles to national defense, from aviation to technology, PCBs are ubiquitous in any industry. In all these industries, product reliability is of paramount importance. Whether it is medical technology or aviation technology, any mistake can cause huge losses. Similarly, in the medical field, equipment failure can have terrible consequences, leading to loss of life. This requires rewriting the traditional predictability method. Traditional predictability methods are usually based on  physical inspection .  However, physical inspection has inherent disadvantages, that is, only external defects can be inspected. Another problem faced by physical inspection is that when the PCB is complex and has countless vias, microsectioni
阅读全文