In JRPanel, Manual Color Toning Is High-precision Craftsmanship

 

The production of membrane switches requires the participation of the printing process. At this time, a screen printing machine is required for printing. The quality of the product printing depends on the printing operation process and the details of the printing. Among them, manual toning is the most important step. Only the precise control of the proportion of each color can produce the color that the customer needs.

 

Toning is a very knowledgeable craft. There are three main colors. These three colors can decorate the membrane switch perfectly. The three colors are red, yellow, and blue. Other colors can be obtained by mixing any two of these three colors. For example, yellow plus blue to green. When mixing colors with colors, pay attention to thoroughly mixing the inks, so that the inks are thoroughly mixed together to avoid color inconsistency, resulting in incoordination of the membrane switch panel. After the color is adjusted, it needs to be compared. The color and gloss of the sample and the substrate must be consistent, and the printing parameters must be consistent before printing.

 

In printing, the main color should be added first, followed by the secondary color. According to the principle of starting from lighter to darker, that is, white, yellow, orange, red, purple, blue, cyan, green, and black, and then darken light tones and light dark tones. Pay attention to the color change during the toning process, and also pay attention to the environment.

 

During the printing process, pay attention to keeping records and proofing numbers for easy adjustment and selection. 

 

It should be noted that since the whole process of toning is done manually, the final color cannot be exactly the same as the required color. What can be done is to get as close as possible to the required colors.

 

The colorists of JRPanel have twenty years of color grading experience, and the colors produced are close to 90% of the required colors.


Click this to know more about JRPanel Toning Process:

https://www.youtube.com/watch?v=a6wabvOwMS4&t=60s

评论

发表评论

此博客中的热门博文

How to Read Circuit Diagrams for Beginners

图片
     👉 https://www.jrpanel.com/R This articles shows how to read circuit diagrams for beginners in electronics. Learn to read electrical and electronic circuit diagrams or schematics. A drawing of an electrical or electronic circuit is known as a circuit diagram, but can also be called a schematic diagram, or just schematic. Circuit or schematic diagrams consist of symbols representing physical components and lines representing wires or electrical conductors. In order to learn how to read a circuit diagram, it is necessary to learn what the schematic symbol of a component looks like. It is also necessary to understand how the components are connected together in the circuit. Battery and Light Bulb Circuit Probably the simplest circuit that can be drawn is one that you may have seen in a school science class: a battery connected to a light bulb as shown below. Simple Circuit Diagram for Beginners Circuit Symbols and Physical Components Each electronic or electrical compon...
阅读全文

In JRPanel, Manual Color Toning Is High-precision Craftsmanship

图片
  The production of membrane switches requires the participation of the printing process. A screen printing machine is required for printing. The quality of the product printing depends on the printing operation process and the details of the printing. Among them, manual toning is the most important step .  Only the precise control of the proportion of each color can produce the color that the customer needs.   Toning is a very knowledgeable craft. There are three main colors. These three colors can decorate the membrane switch perfectly. The three colors are red, yellow, and blue. Other colors can be obtained by mixing any two of these three colors. For example, yellow plus blue to green. When mixing colors with colors, pay attention to thoroughly mixing the inks, so that the inks are thoroughly mixed together to avoid color inconsistency, resulting in incoordination of the membrane switch panel. After the color is adjusted, it needs to be compared. The color and gl...
阅读全文

Smart PCB Manufacturing-the Next Stage of Advancement in Safety Equipment

图片
  Cities around the world are developing rapidly, crime is more difficult than ever, criminals are smarter than ever, and citizens’ property is threatened. The number of smart technologies on display has shown unprecedented signs of growth: video surveillance, attack and anti-theft alarm systems, access control, fire alarm and voice alarm technologies are all expanding.   With the advent of the Internet of Things, custom PCB manufacturing is now more popular than ever. Equipment manufacturers will be forced to make a safety-critical gadget in their bid to innovate and remain competitive. Aerospace, defense, automotive, medical and industrial control are only part of the vertical industry, with the growth of increased capabilities for device interconnection and remote collaborative work. This article attempts to explain how PCBs can make life easier for the monitoring team. How PCB-based electronic monitoring equipment promotes market development through its unparalleled vigila...
阅读全文